Specifications

Installing PCBs
2-6 ◆ Section 2: PCB Installation DS2000 Hardware Manual
16-Port Analog Station (16ASTU) PCB
The 16ASTU PCB provides connection for 16 analog extensions.
To install the 16ASTU PCB (Figure 2-8) (Figure 2-9):
1. Check your system configuration to be sure you do not exceed the allowable System Load Factor.
2. Plug the 16ASTU PCB into any available slot from
CN2-CN8.
You should reserve
CN1 for a 16DSTU PCB.
The PCB will auto-ID when you plug it in.
3. Set the mode switch on the 16ASTU PCB to
RUN.
Figure 2-8: 16-Port Analog Station (16ASTU) PCB
Figure 2-9: Installing the 16ASTU PCB
Mode switch
4 Slot Cabinet Shown