User manual

56K PCI DATA/FAX Modem 4
4. Hardware Installation
1. Turn off your computer.
2. Open the case of your PC and plug the 56K PCI Modem card into a free PCI slot on your motherboard.
3. Fix the 56K PCI Modem card onto your case and then close your computer case.
4. Unplug the telephone line from the wall socket, then plug the telephone line into the socket on the back of
the modem marked PHONE.
5. Plug the phone cord supplied into the socket on the back of the modem marked LINE then Plug the other
end of the cord into the wall socket.
6. Power on your computer.
7. This completes the setting up of your modem hardware. Please proceed to the next section for information
on installing the modem drivers in Windows 98SE/ME/XP/2000.
NOTE : You need to have an account from an Internet service provider in order to
connect to Internet.