User manual

73
push the WPS button in 2 minutes to enter the network. The client will search to see if there is any
wireless base station which supports WPS is activating. If the client finds a matching base, the
connection will be established. The speed of establishing a connection is slower than the PIN model
because of this extra step.
On the other hand, users need to input the information of the wireless card into the register interface.
It might lead to the failure of connection, if users make mistakes on inputting. On PBC model, users
only need to click the WPS button on both sides to make a connection. It is easier to operate.
This page supports Start PBC and Start PIN; please read the following instructions
* Start PBC:
(1) Click Start PBC to connect to the wireless network card.
(2) Click OK to start WPS process.