User manual

CAR
-
854 Wireless
b
/g
A
D
SL
2
/
2
+
M
od
em
R
ou
ter
User Manua l
- 55 -
Field Description
System Description System description of the DSL device.
System Contact Contact person and/or contact information for the DSL device.
System Name An administratively assigned name for the DSL device.
System Location The physical location of the DSL device.
System Object ID
Vendor object identifier. The vendor’s authoritative identification of the network
management subsystem contained in the entity.
Trap IP Address Destination IP address of the SNMP trap.
Community name
(read-only)
Name of the read-only community. This read-only community allows read operation to all
objects in the MIB.
Community name
(write-only)
Name of the read-only community. This write-only community allows write operation to
the objects defines as read-writable in the MIB.
Apply Changes
Save SNMP configuration. New configuration will take effect after saving into
flash memory and rebooting the system. See section “Admin” for details.
5.6.4 IP QoS
The DSL device provides a control mechanism that can provide different priority to
different users or data flows. The QoS is enforced by the QoS rules in the QoS table.
A QoS rule contains two configuration blocks: Traffic Classification and Action.
The Traffic Classification enables you to classify packets on the basis of various
fields in the packet and perhaps the physical ingress port. The Action enables you to
assign the strictly priority level for and mark some fields in the packet that matches
the Traffic Classification rule. You can configure any or all field as needed in these
two QoS blocks for a QoS rule.