User manual

CAR
-
854 Wireless
b
/g
A
D
SL
2
/
2
+
M
od
em
R
ou
ter
User Manua l
- 53 -
Field Description
Enable Check to enable the selected route or route to be added.
Destination The network IP address of the subnet. The destination can be specified as the IP address of
a subnet or a specific host in the subnet. It can also be specified as all zeros to indicate that
this route should be used for all destinations for which no other route is defined (this is the
route that creates the default gateway).
Subnet Mask
The network mask of the destination subnet. The default gateway uses a mask of 0.0.0.0.
Next Hop
The IP address of the next hop through which traffic will flow towards the destination
subnet.
Metric Defines the number of hops between network nodes that data packets travel. The default
value is 0, which means that the subnet is directly one hop away on the local LAN
network.
Interface The WAN interface to which a static routing subnet is to be applied.
Function buttons in this page:
Add Route
Add a user-defined destination route.
Update
Update the selected destination route on the Static Route Table.
Delete Selected
Delete a selected destination route on the Static Route Table.