User manual

CAR
-
854 Wireless
b
/g
A
D
SL
2
/
2
+
M
od
em
R
ou
ter
User Manua l
- 49 -
Field Description
IGMP Proxy Enable/disable IGMP proxy feature
Proxy Interface The upstream WAN interface is selected here.
Apply Changes
Click to save the setting to the configuration.
5.5.5 UPnP Configuration
The DSL device supports a control point for Universal Plug and Play (UPnP) version
1.0, and supports two key features: NAT Traversal and Device
Identification. This feature requires one active WAN interface. In addition,
the host should support this feature. In the presence of multiple WAN
interfaces, select an interface on which the incoming traffic is present. With
NAT Traversal, when an UPnP command is received to open ports in NAT,
the application translates the request into system commands to open the
ports in NAT and the firewall. The interface to open the ports on is given to
UPnP when it starts up and is part of the configuration of the application.
For Device Identification, the application will send a description of the
DSL device as a control point back to the host making the request.