User manual

CAR
-
854 Wireless
b
/g
A
D
SL
2
/
2
+
M
od
em
R
ou
ter
User Manua l
- 30 -
WPA Authentication
Mode
There are 2 types of authentication mode for WPA.
WPA-RADIUS: WPA RADIUS uses an external RADIUS server to perfo
rm user
authentication. To use WPA RADIUS, enter the IP address of the RADIUS serv
er,
the RADIUS port (default is 1812) and the shared secret from the RADIUS serv
er.
Please refer to “Authentication RADIUS Server” setting below for RADIUS
setting. The WPA algorithm is selected between TKIP and AES, please refer to
“WPA cipher Suite” below.
Pre-Shared Key: Pre-Shared Key authentication is based on a shared secret th
at is
known only by the parties involved. To use WPA Pre-Shared Key, select key
format and enter a password i the “Pre-Shared Key Format” and “Pre-Shar
ed Key”
setting respectively. Please refer to “Pre-Shared Key Format” and
“Pre-Shared Key” setting below.
Pre-Shared Key Format
PassPhrase: Select this to enter the Pre-Shared Key secret as user-friendly textual
secret.
Hex (64 characters): Select this to enter the Pre-Shared Key secret as
hexadecimal secret.
Pre-Shared Key
Specify the shared secret used by this Pre-Shared Key. If the “Pre-Shared Key
Format” is specified as PassPhrase, then it indicates a passphrase of 8 to 63
bytes long; or if the “Pre-Shared Key Format” is specified as PassPhrase, then it
indicates a 64-hexadecimal number.
Authentication
RADIUS Server
If the WPA-RADIUS is selected at “WPA Authentication Mode”, the port (default
is 1812), IP address and password of external RADIUS server are specified here.
Function buttons in this page:
Apply Changes
Change the settings. New parameters will take effect after save into flash memory and
reboot the system. See section “Admin” for save details.
5.3.4 Access Control
This page allows administrator to have access control by enter MAC address of client
stations. When Enable this function, MAC address can be added into access control
list and only those clients whose wireless MAC address are in the access control list
will be able to connect to your DSL device (or AP).