Specifications

XPEED Indoor Series WWW.CNBTEC.COM

4. OSD Menu

⊙ Pattern setup

• PATTERN NO. [1~4]

Selects Pattern number to edit. If a selected pattern number is not

defined, “UNDEFINED” will be displayed under selected pattern number.

• CLR PATTERN [CANCEL/OK]

Deletes data in current pattern.

• EDIT PATTERN Starts editing pattern.

■ EDIT PATTERN

① By using Joystick, move to start position with appropriate zoom.

To start pattern recording, press NEAR key. To exit this menu, press FAR key.

② Move camera with joystick of controller or run preset function to memorize the path (mostly curve

path) in a selected pattern. The total memory size and the rest memory size is displayed in the form

of bar.

Maximum 1200 communication commands can be stored in a pattern.

③ To save data and exit, press NEAR key. To cancel recording and delete record data, press FAR key.