User guide

• CLR ALL DATA
- Deletes all configuration data such as display,
camera, motion setup and so on.
• CLR DISPLAY SET
- Initializes Display Configuration.
• CLR CAMERA SET
- Initializes Camera Configuration.
• CLR MOTION SET
- Initializes Motion Configuration.
• CLR EDIT DATA
- Deletes Preset Data, Swing Data, Pattern Data and Group Data.
• REBOOT CAMERA
- Reboots Zoom Camera module.
• REBOOT SYSTEM
- Reboots Speed Dome Camera.
SYSTEM INITIALIZE Initial Configuration Table
SYSTEM INITIALIZE
CLEAR ALL DATA
BACK
EXIT
├
CLR DISPLAY SET
├
CLR CAMERA SET
├
CLR MOTION SET
└
CLR EDIT DATA
REBOOT CAMERA
REBOOT SYSTEM
NO
NO
NO
NO
NO
NO
NO
☞
Display Configuration Camera Configuration
Camera ID ON Focus Mode SemiAuto
PTZ Information AUTO Digital Zoom ON
Action Title AUTO Image Flip OFF
Preset Label AUTO White Balance AUTO
Alarm In/Output AUTO Backlight OFF
North Direction Pan 0° Day/Night AUTO2
Privacy Zone Undefined Brightness 25
Iris AUTO
Shutter ESC
Motion Configuration
AGC HIGH
SSNR MIDDLE
Motion Lock OFF SENS-UP AUTO (4 Frame)
Power Up Action ON
Freeze In Preset OFF
User Edit Data
Calibration OFF
Auto Flip ON Preset 1~128 Undefined
Jog Max Speed 120°/sec Swing 1~8 Undefined
Jog Direction INVERSE Pattern 1~4 Undefined
Park Action OFF Group 1~8 Undefined
Alarm Action OFF
36 37