XNET Network Weatherproof Camera Installation Guide XNET Network Weatherproof Camera (IXC2050IR) Installation Guide Ver. 1.
XNET Network Weatherproof Camera Installation Guide About this Installation Guide A compatibility and durability test ensured this product’s high performance. This installation guide is for XNET Network Weatherproof Camera users only, and it describes operations related to XNET Network Weatherproof Camera. Please read this manual thoroughly paying attention to cautions and warnings before using the product even if you have used similar products before.
XNET Network Weatherproof Camera Installation Guide Index 1.About XNET ............................................................................................................................. 4 1.1. About XNET..................................................................................................................... 4 1.2. Features of XNET............................................................................................................. 4 1.3. Applications ..........................
XNET Network Weatherproof Camera Installation Guide 1.About XNET 1.1. About XNET XNET is an internet based security and surveillance system that is compatible with various network conditions through easy installation and user interface as well as multi-functional compressor Codec such as H.264, MJPEG. XNET provides stable real-time surveillance by real time video/ audio at 1080P level, local storage for any network problems, and hybrid IP technology that can be used with existing analog CCTV devices. 1.2.
XNET Network Weatherproof Camera Installation Guide educational trainings over the network, and much more. 2. About the Product 2.1 Contents Please make sure that no contents listed below are missing in the package. SUNSHEILD AND SCREW IXC2050IR PRODUCT L Wrench Screw and Anchor Adaptor and Power Cable CD Video Cable 2.
XNET Network Weatherproof Camera Installation Guide 2.3 Hardware 2.3.
XNET Network Weatherproof Camera Installation Guide 2.3.2 Camera Module – Bottom ① Micro SD Card Slot : Enables recording of video data to an external memory device upon occurrence of an event. Please use less than 16 GB SD Memory. ② Video Out : Use this output to monitor the analog video signal while installing.
XNET Network Weatherproof Camera Installation Guide 2.3.3 Cable Connection Power Input Use the cable adapter in the package to connect power. Please use the accessory power supply provided in the package. (DC12V/2A) Analog Video Output Use this output for immediate monitoring of the video during installation. Use the supplied cable adapter (Yellow for video and Black for Video Ground GND) This adapter can be connected to a cable through a RCA termination.
XNET Network Weatherproof Camera Installation Guide 2.3.4 Connecting to Alarm Devices Alarm Input Wires from various sensor type (IR, heat, and magnetic) can be connected to Alarm in(+)/(-) terminal as shown in figure 2.5. (NC or NO of sensor input can be selected at Menu screen.) Alarm Sensor device requires a separate power source. Internal Circuitry External Circuitry Alarm Output This terminal can only be connected up to DC 30V/400mA.
XNET Network Weatherproof Camera Installation Guide 3. Software Installation This section provides brief guidelines to install the XNET quickly and to monitor XNET’s Video and Audio signals easily. If you have questions about details not explained in this section or if the product is not functioning as described, please refer to FAQ before contacting the store. Our homepage is http://www.cnbtec.com. 3.1 Connecting XNET to network 3.1.1 Mounting the Camera A.
XNET Network Weatherproof Camera Installation Guide 3.1.2 Installing XNET Connect XNET to PC directly User can monitor and configure XNET camera by connecting it to your PC directly. A. Connect XNET camera to your PC directly using a LAN cable like below. COMPUTER Crossover Network Cable NOTE: XNET camera’s IP address will be automatically set to the default value, 192.168.123.100, after connecting XNET camera to your PC directly. (This process approximately takes 20~30 seconds) B.
XNET Network Weatherproof Camera Installation Guide C. Please insert the Setup CD into your CD-ROM drive, and then please setup IPInstaller program D. Please click ‘Next’ button when the Setup screen appear. E. Please click ‘Install’ button to begin the Installation. F. Please click ‘Finish’ button to complete the installation.
XNET Network Weatherproof Camera Installation Guide G. XNET IP Installer program is automatically launched like below right after the program installation. Please double click XNET camera on the list. H. XNET camera is successfully connected to your PC. (Internet Explorer will prompt you to install ActiveX. In order to view video, you must accept the ActiveX download. ) NOTE: Please select Setting menu for XNET camera configuration. If the login prompt appears, please enter User name and Password.
XNET Network Weatherproof Camera Installation Guide Connect XNET with a router Please connect XNET camera and PC to a router using LAN cables like below. COMPUTER Direct Network Cable NOTE : If DHCP server is enabled at your router, XNET camera automatically receives an IP address from your router. Otherwise, XNET camera’s IP address will be automatically set to the default value, 192.168.123.100.
XNET Network Weatherproof Camera Installation Guide 3.2. Installing IP-Installer Software and Configuring IP address 3.2.1. About IP-Installer A unique IP address has to be configured in order to connect IP camera and monitoring PC to a network. IP-Installer software provided in the Installation CD (included in the package and also available to download from our website http://www.cnbtec.com) will configure IP address easily.
XNET Network Weatherproof Camera Installation Guide B. Select the camera you wish to configure and click (Set IP Address) button to open the box shown in Figure 3-2. Figure 3-2. Set IP Address box C. When you enter the IP address and click Set button, the box shown in Figure 3-3 will appear. Figure 3-3. Select Network Adapter Box D. Select the adapter and click select button to change the IP address of the camera.
XNET Network Weatherproof Camera Installation Guide 4. Using Web Viewer Connecting to network devices can be done using internet web browser or “XNET-CMS” software. This guide explains about using internet web browser only. For instructions on how to configure network connection using XNET-CMS software, please refer to XNET-CMS Manual, which can be found in the installation CD. 4.1. Logging In Enter the IP address of the device on the address bar of your web browser and press enter key.
XNET Network Weatherproof Camera Installation Guide 4.2. Web Viewer Page Web viewer page consists of Video monitor screen and menu option buttons. Figure 4-2 Web Viewer page Item Capture Sub Item - Description Captures and saves the current image as a still picture. The image is saved as jpeg file in the following folder: C:₩xNetCapture Brings up Menu screen. Setting - Setup page for each XNET feature can be opened from this Menu screen. Please refer to [XNET Owner’s Manual] for detail.
XNET Network Weatherproof Camera Installation Guide 5. Specifications IXC2050IR Signal System Specifications Progressive image processing Scanning System Camera 16:9 Progressive Pixel Clock 80MHz Image Sensor 1/3" Progressive CMOS Sensor Sync. System Internal Effective Pixels Number 1920 (H) x 1080(V) 2.0 Mega Horizontal Resolution 1100 TV Lines Video Output Level Select NTSC/PAL 1.0Vp-p (RCA 75Ω, composite) Lens Built-in Fixed Mega pixel Lens, f=4.0mm, F 2.0 Min. Illumination 1.
XNET Network Weatherproof Camera Installation Guide Dimensions(mm) The casing, parts, and specifications of this product are subject to change without prior notice for improvements.
