Ver. 1.
Network Video Server Installation Manual About this Installation Manual A compatibility and durability test ensured this product’s high performance. This installation manual is for XNET Network Video Server users only, and it describes operations related to XNET Network Video Server. Please read this manual thoroughly paying attention to cautions and warnings before using the product even if you have used similar products before.
Network Video Server Installation Manual Index 1. About XNET ................................................................................................................................................ 4 1.1. About XNET ......................................................................................................................................... 4 1.2. Features of XNET .............................................................................................................................
XNET Network Video Server Installation Manual 1. About XNET 1.1. About XNET XNET is an internet based security and surveillance system that is compatible with various network conditions through easy installation and user interface as well as multi-functional compressor Codec such as MJPEG, MPEG-4, and H.264. XNET provides stable real-time surveillance by real time video/ audio at D1 level, local storage for any network problems, and hybrid IP technology that can be used with existing analog CCTV devices.
XNET Network Video Server Installation Manual 2. About the Product 2.1. Contents Please make sure the following contents are included when you open the package. Contents XNET Product Power adapter AC power Cord CD Description Additional info. Network Video Server Input: 100~240VAC 50-60Hz Output : 12VDC, 5A 3 jack cable Software and User’s manual 2.2.
XNET Network Video Server Installation Manual 2.3. Functions and designations 2.3.1. Outer View Cover Screw Camera Cable Feed In Power/Video/ Control Camera Mount Hole Cable Feed In Network/Power/Alarm/Audio Figure 2-1. IJB2000 Outer 2.3.2. Inner View Audio Input/ Output Connection Terminal to Camera Alarm Input/ Output Restart Button Restarts the network Server.
XNET Network Video Server Installation Manual Video In GND Control RS485+ Control RS485+12VDC GND Audio In(Mic/Line) Audio GND Audio Out (Line) Audio GND Alarm Sensor In + Alarm Sensor In Alarm Out Alarm Out +12Vdc GND Figure 2-3. Connection Terminal Block z MIC/LINE IN : Connects to auxiliary Audio Device or microphone. z LINE OUT : Audio signal output to a Power Amplified device or Speaker. This can be used to listen to the audio signal sent from a remote PC for Bi-directional Audio communication.
XNET Network Video Server Installation Manual z Power INPUT: Connect 12V DC Power to this terminal. Please use the power adapter came in the package. z STATUS LED : Indicates the operation status - CPU LED : Green light will blink after 50 seconds on power. - Video Loss LED : Red light indicates that there is no Video Input signal. - EVENT LED : Green light indicates that Alarm Out signal is turned on. - POWER LED : Red light indicates that 12V DC power is connected. 2.3.3.
XNET Network Video Server Installation Manual 3. Product Installation This section provides brief guidelines to install the XNET quickly and to monitor XNET’s Video and Audio signals easily. If you have questions about details not explained in this section or if the product is not functioning as described, please refer to FAQ before contacting the store. Our homepage is http://www.cnbtec.com. 3.1. Hardware Installation 3.1.1.
XNET Network Video Server Installation Manual 3.1.2. Connecting the Cable 1. Connect the wires according to the detail shown in the table below. (Cut wires if necessary.) YELLOW BLACK GREEN BROWN RED ORANGE This Junction box is designed to be used with specific cameras.
XNET Network Video Server Installation Manual 2. A PC or a laptop computer is required to set up an IP address. z Compatible operating system: Windows 2000/ Windows XP/ Windows Vista z Since the default IP address of the device is 192.168.123.100, set up the IP address of the computer like the following: IP Address : 192.168.123.101 Subnet Mask : 255.255.255.0 3. Connect LAN cable to the Network Terminal of the product.
XNET Network Video Server Installation Manual 3.2. Installing IP-Installer Software and Configuring IP address 3.2.1. About IP-Installer A unique IP address has to be configured in order to connect network device and monitoring PC to a network. IP-Installer software provided in the Installation CD (included in the package and also available to download from our website http://www.cnbtec.com) will configure IP address easily.
XNET Network Video Server Installation Manual 2. Select the device of which you wish to change the IP address and click (Set IP Address) button to bring up the following box in Figure 3-3. Figure 3-3. IP Address box 3. When you enter the IP address and click Set button, the box shown in Figure 3-4 will appear. Figure 3-4. Select Network Adapter Box 4. Select the adapter and click select button to change the IP address of the device.
XNET Network Video Server Installation Manual 4. Using Web Viewer Connecting to network devices can be done using internet web browser or “XNET-CMS” software. This manual explains about using internet web browser only. For instructions on how to configure network connection using XNET-CMS software, please refer to XNET-CMS Manual, which can be found in the installation CD. 4.1. Logging In Enter the IP address of the device on the address bar of your web browser and press enter key.
XNET Network Video Server Installation Manual 4.2. Web Viewer Page Web viewer page consists of Video monitor screen and menu option buttons. Figure 4-2.
XNET Network Video Server Installation Manual Item Sub Item Capture - Description Captures and saves the current image as a still picture. The image is saved as jpeg file in the following folder: C:₩xNetCapture Brings up Menu screen. Setting - Setup page for each XNET feature can be opened from this Menu screen. Please refer to [XNET Owner’s Manual] for detail. Opens up PTZ page. PTZ - This page can set up control of PTZ movement. Please refer to [XNET Owner’s Manual] for detail.
XNET Network Video Server Installation Manual 5. Specifications IJB2000 Video Signal Specifications Input Signal 1ch Input Composite by B3, B4, B5, B6 Series Signal Select NTSC/PAL (Manual) Compatible Camera Model B3 / B4 / B5 / B6 Series all models Compression MJPEG / MPEG4 / H.264 Frame rate Resolution Video / Audio Single Mode : Main(H.264@30fps) *D1 Dual Mode : Main(H.
XNET Network Video Server Installation Manual 18 / 18
