Ver. 1.
XNET Network Box Camera Installation Manual About this Installation Manual A compatibility and durability test ensured this product’s high performance. This installation manual is for XNET Network Box Camera users only, and it describes operations related to XNET Network Box Camera. Please read this manual thoroughly paying attention to cautions and warnings before using the product even if you have used similar products before.
XNET Network Box Camera Installation Manual Index 1 . About XNET ..................................................................................................................... 4 1.1. About XNET............................................................................................................................ 4 1.2. Features of XNET ................................................................................................................... 4 1.3. Applications ..........................
XNET Network Box Camera Installation Manual 1. About XNET 1.1. About XNET XNET is an internet based security and surveillance system that is compatible with various network conditions through easy installation and user interface as well as multi-functional compressor Codec such as MJPEG, MPEG-4, and H.264. XNET provides stable real-time surveillance by real time video/ audio at SXGA level, local storage for any network problems, and hybrid IP technology that can be used with existing analog CCTV devices.
XNET Network Box Camera Installation Manual 2. About the Product 2.1. Contents Please make sure the following contents are included when you open the package. Contents XNET product Auto Iris Lens Plug Power adapter AC power Cord CD Description Additional info. Network Box Camera (Lens not included) Connection plug for Auto-Iris control signal Input: 100~240VAC 50-60Hz Output : 12VDC, 2A 2 jack cable Software and User’s manual 2.2.
XNET Network Box Camera Installation Manual 2.3. Functions and Designations 2.3.1. Side View Mounting Screw Hole Auto Iris control plug 1/4”. 20 UNC(20 THREAD) L : 4.5mm +-0.2mm (ISO standard) or 0.197” (ASA standard) CS Ring Fix Screw Lens(Sold Separately) *Please ask at the store about purchasing lens separately. CS Ring Attach CS Ring only to use CS-mount Lens Figure 2-1. Network Camera Side view yLens (Sold separately): C or CS mount/ Fixed or Vari-Focal DC Auto-Iris lens.
XNET Network Box Camera Installation Manual 2.3.2. Rear View RS-485 and alarm Input/ Output Analog video Output Power Input for 12 VDC Factory Reset Button Recalls initial factory settings POWER LED Network Terminal Event LED Mic / audio Input Audio Output SD CARD Slot Figure 2-2. Network Camera Rear view MIC / LINE IN: Connects to auxiliary Audio Device or microphone. 3.5 mm mono/ stereo audio connector is used.
XNET Network Box Camera Installation Manual NETWORK : This Ethernet terminal connects to 10Mbps or 100Mbps LAN through an RJ-45 connector. When optional PoE is used, the power will be supplied from the Network Cable. LINK : Yellow light indicates that he network is properly connected. ACT : Green light indicates that the XNET system connected to 100Mbps LAN. This green lamp will blink if the system receives data.
XNET Network Box Camera Installation Manual 2.3.3 Connecting to Alarm devices Alarm Input Wires from various sensor type (IR, heat, and magnetic) can be connected to Alarm in(+)/(-) terminal as shown in figure 2.5. (NC or NO of sensor input can be selected at Menu screen.) Alarm Sensor device requires a separate power source. Signal(+5 ~ 30VDC) Alarm in(+) Sensor Device + Adaptor - GND Photo Coupler Alarm in(-) Internal Circuitry External Circuitry Figure 2-5.
XNET Network Box Camera Installation Manual 3. Software Installation This section provides brief guidelines to install the XNET software quickly and to monitor XNET’s Video and Audio signals easily. If you have questions about details not explained in this section or if the product is not functioning as described, please refer to FAQ before contacting the store. Our homepage is http://www.cnbtec.com. 3.1. Connecting XNET to network 1.A PC or a laptop computer is required to set up an IP address.
XNET Network Box Camera Installation Manual 3.2. Installing IP-Installer Software and Configuring IP address 3.2.1. About IP-Installer A unique IP address has to be configured in order to connect network camera and monitoring PC to a network. IP-Installer software provided in the Installation CD (included in the package and also available to download from our website http://www.cnbtec.com) will configure IP address easily.
XNET Network Box Camera Installation Manual 2. Select the camera of which you wish to change the IP address and click (Set IP Address) button to bring up the following box in Figure 3-3. Figure 3-3. IP Address box 3. When you enter the IP address and click Set button, the box shown in Figure 3-4 will appear. Figure 3-4. Select Network Adapter Box 4. Select the adapter and click select button to change the IP address of the camera.
XNET Network Box Camera Installation Manual 4. Using Web Viewer Connecting to network devices can be done using internet web browser or “XNET-CMS” software. This manual explains about using internet web browser only. For instructions on how to configure network connection using XNET-CMS software, please refer to XNET-CMS Manual, which can be found in the installation CD. 4.1. Logging In Enter the IP address of the device on the address bar of your web browser and press enter key.
XNET Network Box Camera Installation Manual Enter the user name and password to bring up the web viewer page. The default id and password is “root”, “admin” respectively. If you want to use a different HTTP port number from the default value, simply put a colon and port number at the end of the IP address. (For example, enter the following address when changing the port to 8080: http://192.168.123.
XNET Network Box Camera Installation Manual 4.2. Web Viewer Page Web viewer page consists of Video monitor screen and menu option buttons. Figure 4-2.
XNET Network Box Camera Installation Manual Item Sub Item Capture - Description Captures and saves the current image as a still picture. The image is saved as jpeg file in the following folder: C:₩xNetCapture Brings up Menu screen. Setting - Setup page for each XNET feature can be opened from this Menu screen. Please refer to [XNET Owner’s Manual] for detail. Opens up PTZ page. PTZ - This page can control of PTZ movement. Please refer to [XNET Owner’s Manual] for detail.
XNET Network Box Camera Installation Manual 5. Specifications IGP1000F Signal System Camera Scanning System 4:3 Progressive Image Sensor Progressive CCD Sensor Sync. System Internal Effective Pixels Number 659 (H) x 494(V) 330K Video Output Level Select NTSC/PAL 1.0Vp-p (BNC 75Ω, composite) Lens C/CS Mount, DC Iris, Manual Iris Flickerless On/Off White Balance Auto/Manual Exposure Auto/Manual Day & Night System ICR Min. Illumination 1 Lux (Color), Electronic Shutter Speed System 0.
XNET Network Box Camera Installation Manual Maintenance Mechanical System Upgrade Firmware upgrade over HTTP PTZ control (RS-485) PTZ Protocol Service (User define update) Operating Temperature -10℃ ~ 40℃ Power DC 12V Max. 5 W Dimensions 128.
