Datasheet

XNET Network Box Camera User’s Guide
y A na Connector: Connector for connecting 3dBi antenna supplied with XNET-Wireless nten
.4. PC Requirements
d from XNET/XNET-Wireless can be decoded or stored in a PC running
2
AV streaming data receive
XNET-NVR program which is a viewing & recording program for a PC. Minimum requirement of
the PC is described below:
Item Minimum Recommended
CPU Pe 0 Pen ve ntium III 70 tium IV 1.2G abo
Main Memory 128 MB 256MB above
Op
*
Window r later Wind ter erating system s 2,000 o ows 2,000 or la
Web browser Internet Explorer 5.0 Internet Explorer 5.0 above
Resolution 1,024*768 Higher than 1,024*768
Network 10 B et ase-T Ethern 100 Base-T Ethernet
* Supp : Windows 200
indows XP Home Edition
2.5 Quick Installation Guide
lation is provided in this section. For more detailed information
orted O/S 0 Professional
Windows XP Professional / W
Brief information for rapid instal
you are recommended to refer to pertinent documentations provided with the product or refer
to our official website. (
http://www.cnbtec.com)
① Connect XNET/XNET-Wireless to the LAN by using one of the following method
ated
Figure 2-5. Connecting Network camera and PC using PoE Adaptor
i. If you have power adaptor with PoE, connect the network camera and PC as illustr
in Figure 2.5. Both power and network connection is made with a single LAN cable. The
propriety PoE (Power over Ethernet) adds convenience in installing the network camera
by providing both power and LAN connection using single LAN cabling.
LAN Hub
PC
100BaseT
PoE Adaptor
LAN
AC In
Cam
XNET
9 of 47