Datasheet

XNET Network Box Camera User’s Guide
P e ag Parameter Setup value Factory default value
Video Size
Set the resolution of the video
transmitted from XNET/XNET-
Wireless.
Max Upload Rate
Set this value smaller than the
upload speed of your network.
11 of 47
Frame Rate
The number of frames to be
transmitted per second.
Basic
Setup
Video Rate
Bandwidth assigned for video
transmitted from XNET/XNET-
Wireless.
Make sure that you press Check
button to find out the number of
maximum possible simultaneous
users then set the number of
users smaller than or equal to
the number.
Administrator
For safety, you are recommended to
change these values from factory
default. For new connection, you Default value
name & need to input changed values for Username : root
password corresponding fields. Do not disclose
these values to others and
memorize these values.
Password : dw2001
User
Admin &
Time
Setup
Current Ti
me Input correct time in this field.
Default value :
2001/1/1
Connect the input and output signals to XNET/XNET-Wireless
⑤
Connectors Function Signal description Number
LINE-
In/MIC
Audio in
Connect microphone or outpu
devices.
1
t from audio
Line Out Audio out for speaker
Audio from remote site is available from
this connector in bi-directional au
dio 1
mode. Connect speaker with amplifier.
Alarm In
Connecting Alarm
Sensor
IR sensor, Motion Sensor, Smoke
Detector…
1
Alarm Out
Connecting Alarm
annunciating device
Siren, Flashing Light, … 1
RS485 PT device control
Remote P/T/Z device connection having
RS485 interface.
1
1
Connect XNET/XNET-Wireless to the
1 00Base-T Network connection
network, LAN, ADSL or Cable modem.
12VDC Power connector The input power source is 12VDC 1