Operation Manual

CD player
- 13 -
5.3. Program CD/ MP3 Tracks
You can program your own playlist with up to 20 tracks.
1. During CD / MP3 CD playback press the STOP button
before programming.
2. Press the PROGRAM CLOCK ADJ button on the remote
control or CLOCK ADJ. MEMORY on the system until 00
P—01 is displayed.
3. Press  or  on the remote control until the desired
track is displayed.
4. Press the PROGRAM CLOCK ADJ button on the remote
control or CLOCK ADJ. MEMORY on the system.
5. Repeat steps 2 and 3 to program further tracks.
Your programming was successful if “MEMORY” is displayed.
See chapter 10 for further settings.