Operation Manual

Preparation
- 10 -
4.2. Insert Battery
The battery compartment is at the rear of the remote control.
1. The CR2025 button cell is already inserted in the remote
control before delivery.
2. Remove the plastic strip to activate the battery.
To change the button cell insert the battery observing the
polarity (+ and -), as marked inside the battery
compartment.
The lifetime of the battery is approximately 6 months with
normal use.
To avoid damage remove the battery from the remote
control during extended periods of non-use.
4.3. Set Current Time
1. Turn the system off.
2. Press the PROGRAM CLOCK ADJ button on the remote
control or CLOCK ADJ. MEMORY on the system.
3. Press  or  on the remote control to set the hour.
4. Press the PROGRAM CLOCK ADJ button on the remote
control or CLOCK ADJ. MEMORY on the system.
The minute display flashes.
5. Press  or  on the remote control to set the minute.
6. Press the PROGRAM CLOCK ADJ button on the remote
control or CLOCK ADJ. MEMORY on the system.