Service manual

19
MD MECHANISM DECK (MDM-5GA)
SLIDER (CAM)
2 four step screws
(BVTPWH M3)
1 connector (CN601)
4 wire (flat type) (23 core
)
(CN103)
4 wire (flat type) (21 core)
(CN102)
6 MD mechanism deck
(MDM-5GA)
3
5
bracket (MDM)
7 slider (cam)
3 bracket (guide L)
1 two screws
(DIA2.6)
4 leaf spring
(electrostatic)
2 ground
wire
When attaching the slider (cam),
this part of the over write head
should be inside arrow
A .
6 bracket (guide R)
5 two screws
(DIA.2.6)
Set the shaft of lever
(O/C) to be at the position
in the figure.
• NOTE FOR INSTALLATION
OF SLIDER (CAM)
A
Set the shaft of cam gear to be
at the position in the figure.