Specifications

8
Adding 2-cycle Mixing Oil
Whenever the red “Low Mixing Oil” warning
lamp turns on, you should add mixing oil as soon
as possible. Open the mixing oil cover on the
right side of the scooter and refill the mixing oil
tank with a high quality 2-stroke oil such as
Opti-2. This will protect the engine’s moving
parts and ensure that you will receive the most
power from the engine as well as the longest
engine life. Opti-2 can be found at your local
Twist N’ Go Dealer.
WARNING! Do NOT add any oil to engine
transmission when red oil light turns on.
Adding Fuel
Note: Turn the engine off when refuelling
 Remove all source of flame from the area when refuelling.
 Unlock and lift seat, remove cap and add fuel. Capacity is approximately
1.5 gallons.
 DO NOT pre-mix oil with fuel. Oil will be added automatically during
operation provided the oil reservoir has 2-cycle oil in it.
 After fuel is filled,
replace cap making sure it is tight and threaded
correctly
Fuel Cap
(Under Seat)