Owner`s manual

Main Switch

After aligning the irregular polygon bottom of the key with the

irregular polygon (1) on the main switch, turn it clockwise and the

key insert slot can be seen. You can then insert the key into the

key slot to perform the functions of starting, shutdown and locking.

To cover the key slot simply turn the cover counterclockwise.

Turn the switch to “ON” to allow the start button

to work.

Turn the switch to “OFF” the engine will shut-

down and the key can be removed.

Turn the handlebars to the left, press the key in

and turn to the “LOCK” position and remove the

key. The handlebars will be locked and the engine

cannot be started.