Owner`s manual

! WARNING: Always turn the ignition off before inspecting the fuses.

CAUTION:

• When removing the fuse from the fuse box do not squeeze the fuse puller or it will

release the fuse.

• When inserting the new fuse be sure that it fits snugly into the fuse socket. A loose fit

will cause intermittent electrical problems and possible overheating of the fuse

contacts.

• Always replace the open fuse with another of the same type!

• When washing your scooter, be sure not to get water into the fuse box as this could

cause electrical problem.

• Do not use a fuse of higher amperage than recommended; this will cause extensive

damage to the electrical system and possibly a fire.

NOTE: If the new fuse burns out immediately, have a TN’G dealer check scooters

complete electrical system.