Owner`s manual

3. Replacing the spark plug,

• Remove the plug cover and remove the spark plug using the spark plug

wrench in the tool kit.

• After setting the gap of the new plug, insert it into the cylinder & tighten

firmly by hand, then by using provided wrench tighten another ½ to ¾ turns.

• Reattach the spark plug cover.

! WARNING: Do not change spark plug while engine is hot.

CAUTION:

• Incorrect gap can cause problems to the scooter engine. Make sure it is correct!

• If the spark plug is fouled or damaged, replace it with (NGKCR7HSA) or like plug.

RECOMMENDATION:

Most spark plugs are self-cleaning. After replacing its best to ride the scooter for a

minimum of 10 min.

CHECKING ENGINE OIL LEVEL

When the scooter is new, the oil will need to be changed after the first 300 Km. (please

review regular maintenance schedule on page 30) The oil level should be checked every

500 km and oil added as needed.

1. Stop the scooter on a level surface and turn the engine off.