Owner`s manual

2. Check the brakes for excessive wear. The middle groove of the brake should still be

visible. If it isn’t, the pads should be replaced.

3. To replace the brake fluid, open the reservoir and add fluid as required.

CAUTION:

• Be sure not to introduce any water or air into the brake system when changing

the fluid.

• Do not spill any brake fluid on any other motorcycle parts as the fluid can

damage metal and paint.

• Always replace the brake fluid with type DOT 3 brake fluid.

RECOMMENDATION: An authorized TN’G Dealer or Service Center should complete all

brake fluid adjustments.

SPARK PLUG REPLACEMENT

Check spark plug if scooter is hard to start.

1. The gap should be between 0.023 & 0.032 inches.

2. The electrode should be a light brown color.