User`s manual

Installing the Software and Running Your First Backup
14
5. external drive that meets
the backup criteria and use it. However, if both an external and internal are found,
If you select YES, the software will look for an internal or
the software will request a further clarification from you as to which one to use, see
below:
Select the name of the hard drive you wi to use as the backup unit. If you have
not connected the backup drive, connect t now and once it has been identified by
6. Once you have selected the target location, the BounceBack software will scan your
computer to determine the size of the backup and estimate the total amount of time
sh
i
the operating system, and select ‘Rescan Device List’ this will update the Device
List display to include the newly connected drive.
to perform the backup. The backup size, time estimation, source and backup
locations are all displayed.