User`s manual

Installing the Software and Running Your First Backup
12
Chapter 3: Installing BounceBack Software and Running
Your First Backup
Important Information
! It is best to connect power to the drive, turn it on, and connect it to the Mac before
installing the software.
! It is highly recommended that you temporarily disable your virus protection software (if
you have it); this will increase the speed of the initial full backup. See your virus
protection software documentation and follow the instructions for temporarily disabling
the program.
Installing the BounceBack Software from CD-ROM
To install the BounceBack software from your CD-ROM drive:
1. Start your computer and wait for the Mac OS to finish loading.
2. Insert the BounceBack CD into the CD-ROM drive.
NOTE: If the CD-ROM drive has a spindle, make sure that the CD is pushed all
the way down.
3. Double click the BounceBack CD icon to open the BounceBack CD window.
4. Double click the BounceBack Installer icon.