User guide

Connecting & Disconnecting from CLEAR 4G Internet

Using Your CLEAR Stick Atlas

• To connect to CLEAR 4G Internet, plug the CLEAR Stick Atlas into the standard USB port of your computer

or other device

• To disconnect, remove the CLEAR Stick Atlas from the USB port

• You can connect and disconnect while leaving the CLEAR Stick Atlas plugged into your computer’s USB port

by going to the administrative area and selecting the “Connect/Disconnect” button located in the upper

left corner

• When using the CLEAR Stick Atlas you can quickly check the signal strength and connection status using the

LEDs located on the device

• Signal strength LEDs: 5 Blue LEDs = Excellent 4G signal

1 Blue LED = Poor 4G Signal

• Connection LED: Green = Connected to CLEAR 4G,

Amber = Disconnected