Specifications

84
Issue 01 XYZ Machine Tools July 08
XYZ 560 Mini Mill and 710 VMC Operation Manual
Figure 53 Machine control panel
6.10.4 ATC Edged Tool Change
1. In the tool holding position, turn the edged tool 60° when the shaft is in position, refer to
Figure 54.
2. Pull edged tool down.
3. Turn the edged tool 180°.
4. At the start of tool holding, pull the edged tool up.
5. Turn the edged tool 60° to the opposite to finish the edged tool change.
xyz-142
Spindle
Override
Spindle Start / Stop
Axis Select
Feed Start / StopFeed Direction
with Rapid
Axis Select
Tool Changer
Functions
Door Open
Lube MCS
Feed
Override