Specifications

69
July 08 XYZ Machine Tools Issue 01
XYZ 560 Mini Mill and 710 VMC Operation Manual
5.6.3 Connecting the Oil Pipe
To connect the oil pipe:
1. Locate the elbow joint on the right side of the lubricator, refer to Figure 45 item 3.
2. Remove the compression nut, refer to Figure 45 item 1.
3. Carefully remove the olive, refer to Figure 45 item 2.
4. Insert the hose, refer to Figure 45 item 4, through the compression nut (1).
5. Insert the olive (2) into the hose (4).
6. Connect the oil pipe, together with the compression nut and olive, to the elbow joint,
refer to
Figure 45 item 3.
Note - To avoid oil leakage during operation, the olive (2) should be inserted into the
hose (4), so that at least 1 mm of the hose protrudes over the olive before connecting
the hose to the elbow joint.
Figure 45 Connection of oil pipe
xyz-033
2
1
4
3