Specifications

68
Issue 01 XYZ Machine Tools July 08
XYZ 560 Mini Mill and 710 VMC Operation Manual
5.6.2 Filling the Centralized Lubrication System
Caution - The lubricator may burn if oil with a viscosity higher than 250 cSt is used.
Note - Only use ISO 32 oil.
Remove the oil tank cap and use clean oil to fill the tank until the oil level reaches the ‘HIGH’
line, refer to
Figure 44. The oil tank has an capacity of 3 litres. After filling the system with oil
to the correct level, replace and lock the oil tank filler cap.
Figure 44 Filling the centralized lubrication system
xyz-032