Specifications

60
Issue 01 XYZ Machine Tools July 08
XYZ 560 Mini Mill and 710 VMC Operation Manual
5. Put the foundation pads on the reserved spaces. Insert the L shape fixing stud through
the foundation pad and the foundation bolt and fasten the fixing stud with the nut, refer
to
Figure 38.
6. Adjust the L shaped fixing studs based on the dimensions shown in Figure 38. Fill the
reserved spaces with concrete.
7. Level the Machine after the concrete has set and is dry and solid.
5.3.2 Foundation Construction Plan Two
1. Make sure the ground is solid enough to install the Machine.
2. Position the levelling blocks.
3. Install the Machine on the levelling blocks.
4. Level the Machine as necessary, refer to Figure 38.