Specifications

54
Issue 01 XYZ Machine Tools July 08
XYZ 560 Mini Mill and 710 VMC Operation Manual
4.5.3 Operation Panel
To support the operation panel, install the transit plate under the operation panel pivot.
4.5.4 Power Cabinet
To support the power cabinet, put sufficient wooden blocks under it.
4.5.5 Miscellaneous
Secure all loose parts inside the crate.
4.6 Remove transit fixtures from the Machine
Before operating the Machine, take care to remove all fixtures including the following:
1. Raise the head and remove the head stand from under the head.
2. Remove the fixture which secures the working table.
3. Remove the transit plate from the operation panel.
4. Remove the fixture from the sliding doors.
5. Remove ATC bracket.
4.7 Storage
4.7.1 Storing the Machine with packaging
1. Secure loose parts.
2. Apply anti-rust treatment to the Machine.
3. Secure the Machine inside the storage crate to prevent the Machine from moving.
4. Protect the Machine with a waterproof cover to prevent damage to the mechanical and
electrical parts and to withstand moisture and corrosive substances.
5. Apply anti-moisture substance to the inside of the storage crate.
6. Do not put the storage crate directly under sunlight or near any heat source.
7. Do not put the storage crate near corrosive substance or equipment which causes
unusual vibration.
8. The Machine must be stored at ambient temperature.
4.7.2 Storing the Machine without packaging
1. Secure loose parts.
2. Apply anti-rust treatment to the Machine.
3. Secure the sliding guards and doors.
4. Protect the Machine with a waterproof cover to prevent damage to the mechanical and
electrical parts and to withstand moisture and corrosive substances.
5. Apply anti-moisture substance to the inside of the electrical cabinet, operating panel and
to all enclosures.
6. Do not put the Machine directly under sunlight or near any heat source.
7. Do not put the Machine near corrosive substance or equipment which causes unusual
vibration.