Specifications

53
July 08 XYZ Machine Tools Issue 01
XYZ 560 Mini Mill and 710 VMC Operation Manual
4.4.3 Lifting the Machine with a Sling Crane or Other Lifting Equipment
Caution - Crane lifting and sling must only be attempted by trained and experienced
personnel.
1. The loading capacity of the lifting equipment must be sufficient for the Machine, refer to
Section 4.3.
2. Please refer to Section 4.3 for packing crate dimensions.
3. Make sure no personnel are in the work area.
4. When lifting the Machine, make sure it is correctly balanced.
5. Do not lift the Machine too high as the Machine could overturn and cause serious injury
and/or damage to the Machine.
6. Use a second person to give lifting instructions.
Figure 35 Lifting the Machine with a sling frame
4.5 Securing the Machine during transportation
4.5.1 Head
Position the working table to the middle and move the saddle as close as possible to the main
column. Put the head stand provided on top of the working table and bolt the head stand in
position. Lower the headstock slowly until it rests on the head stand.
4.5.2 Tool Magazine (560 Mini Mill Only)
The carousel is supplied with a fixing bracket which should be secured before transporting the
machine.
xyz-045