Specifications

52
Issue 01 XYZ Machine Tools July 08
XYZ 560 Mini Mill and 710 VMC Operation Manual
4.3 Machine weights and packing crate dimensions
4.4 Lifting the Machine in it’s packing crate
4.4.1 Safety Precautions for Lifting the Machine
The following safety precautions must be obeyed when lifting or moving the Machine.
1. Use a forklift of sufficient capacity to raise or move the Machine.
2. When lifting the Machine, make sure it is correctly balanced.
3. When lifting the Machine, use a second person to give lifting instructions.
4. Make sure the forks of the forklift protrude the edge of the Machine bottom.
5. Do not raise the Machine too high as this can cause instability.
6. The forklift must be operated by qualified personnel.
4.4.2 Lifting the Machine with a Forklift Truck
1. The loading capacity of the lifting equipment must be a minimum as specified in
Section 4.3.
2. Please refer to Section 4.3 for packing crate dimensions.
3. Make sure the forklift truck is of sufficient capacity to avoid overturning because of the
abnormal height. Always keep the load as close as possible to the ground.
4. Use a second person to give lifting instructions.
Figure 34 Lifting the Machine with a forklift truck
Machine With Pallet Package Weight
Width (cm) Depth (cm) Height (cm) Kg
Mini Mill 560 200 230 244 3,100
Vertical Machining Center 710 230 230 250 3,800
xyz-044
LOAD
CAPACITY
Depth
Width
Height