Specifications

38
Issue 01 XYZ Machine Tools July 08
XYZ 560 Mini Mill and 710 VMC Operation Manual
3.1.9 Enclosure
The fully enclosed sheet metal enclosure is designed to protect the operator from the running
machine, moving parts, cutting coolant and any swarf generated. Swarf is conveyed through
the swarf conveying tunnel to the swarf collection bucket. The circulating cutting coolant is
pumped through the coolant filters to the coolant distributors.
The sheet metal enclosure has a one-piece front door so that you can inspect the machine or
install the workpiece easily.
WARNING - Make sure the machine has fully stopped before opening the one-piece
door. If the door is opened during operation the machine stops to protect the
operator from debris, cutting coolant and moving parts. Make sure you close the one-
piece front door before you start the machine.
Figure 29 Enclosure (xyz-061)
xyz-061