Specifications

Issue 01 XYZ Machine Tools July 08

XYZ 560 Mini Mill and 710 VMC Operation Manual

2.3.7.2 Prior to filling the centralized lubrication system with oil.

Caution - Only fill the centralized lubrication system with new oil.

• Only use ISO 32 Oil.

• Do not fill the centralized lubrication system with chemical substances or water.

• Remove all particles and dirt from the oil tank to maintain the correct lubrication.

• Do not spill oil on the display and control panel when filling the oil tank.

2.3.7.3 Safety precautions for the centralized lubrication system control panel.

• Make sure the control panel does not come in contact with water or oil.

2.3.7.4 If a failure occurs in the centralized lubrication system, only XYZ Machine Tools

are approved to repair the centralized lubrication system.