Specifications

4
Issue 01 XYZ Machine Tools July 08
XYZ 560 Mini Mill and 710 VMC Operation Manual
WARNING - When the noise level is high in the working environment, wear earplugs
and appropriate personal protective equipment to prevent injury.
WARNING - Make sure the machine has fully stopped before opening the one-piece
door. If the door is opened during operation the machine stops to protect the
operator from debris, cutting coolant and moving parts. Make sure you close the one-
piece front door before you start the machine.
WARNING - Do not lift the machine with lifting equipment that does not conform to
the load capacity. This can result in personal injury and damage to the machine and
equipment.
WARNING - Lethal Voltages. Use suitably qualified electricians to install and
maintain the machine electrical equipment. Failure to do so will result in a lethal
electric shock or serious injury.
WARNING - Danger of electrical shock. Do not turn on power before the protective
grounding has been correctly connected. Failure to do so will result in a lethal electric
shock or serious injury.
WARNING - Before operating the machine, make sure the wires and cables are
insulated correctly to prevent electric shock and serious injury.
WARNING - Risk of serious injury. Make sure the main power supply to the machine
is isolated and warning signs are displayed before inspecting the belt tension. Failure
to isolate the main power supply can result in serious injury.