Specifications
3
July 08 XYZ Machine Tools Issue 01
XYZ 560 Mini Mill and 710 VMC Operation Manual
2.0 Safety
The safe operation of the machine depends on its correct use and the precautions taken by the
operator.
• Read and understand this manual. Make sure the operator understands the operation
and safety requirements of the machine before operating it.
• Always wear the correct personal protective equipment.
• Do not wear gloves, rings, watches, long sleeves, neckties, jewellery or any other loose
items when around or operating the machine.
• Obey the necessary COSHH and risk assessments.
• The machine is to be only used for the milling and drilling of cold metal within the stated
capacity of the machine and axes movement by manual use of handwheels, jogstick or
CNC control.
• The machine must only be operated by trained and experienced operators.
• The machine must be used in a standard workshop environment and is not suitable for
potentially explosive atmosphere.
• Any other use of the machine must be subjected to a risk assessment by a responsible
person.
2.1 Safety Publications
The following publications must be obeyed to ensure the safe use of the machine.
EC Machinery Directive 2006/42/EC and Power Provision and Use of Work Equipment
Regulations.
2.2 Warnings, Cautions and Notes
2.2.1 Warnings, Cautions and Notes Used in this Manual
WARNING - Hazards or unsafe practices that may result in severe personal injury
or death. These are orange in colour.
Caution - Hazards or unsafe practices that could result in minor personal injury and/
or damage to the equipment. These are yellow in colour.
Note - Calls attention to specific issues regarding special attention or understanding.
2.2.2 List of Warnings in this Manual
WARNING - The machine is equipped with safety devices. Do not modify any safety
devices on this machine. If changes to these safety devices are made, XYZ Machine
Tools will not be responsible for any issues of product liability. Any changes will also
invalidate any remaining warranty entitlement.