Specifications

103
July 08 XYZ Machine Tools Issue 01
XYZ 560 Mini Mill and 710 VMC Operation Manual
8.6.2 Remove the Spline (Output) Shaft
1. Remove the case cap of the hexagonal screw (227) and remove the pin (246), refer to
Figure 66 and Figure 67.
2. Remove the case cap (101B).
3. Loosen the hexagonal screw (225) and remove the front fix cap (111).
4. Remove the spline (output) shaft (106), transmit wheel (107), sun’s nut (208), sun’s
gasket (210).
5. To install the spline (output) shaft, do the reverse of the removal procedure above.