Specifications

1
July 08 XYZ Machine Tools Issue 01
XYZ 560 Mini Mill and 710 VMC Operation Manual
1.0 Introduction
The machine is one product of the Vertical Machining Center series which is supplied by XYZ
Machine Tools Ltd.
The machine consists of a bed base, headstock, main column, saddle, working table, operation
panel, hydraulics, lubrication system, chip conveyor, chip collecting equipment, safety guards
and CNC controllers, etc.
The machine is designed to machine workpieces that do not generate powder chips, corrosion
or flammable substances, such as magnesium alloy.
The machine has a centralized lubrication system which is designed to lubricate various
components such as ball bearings, flat bearings, flat slideways, circular slideways, linear
guides, cams, gears, chains, etc.
This manual gives details of how to install, operate, adjust and maintain the machine.
Please carefully read all of the manuals provided. Do not use the machine unless you
understand how to operate and stop the machine, and also understand all of the safety
matters. Please contact us with any queries you may have.
1.1 Manual Organization
Section 2 of this manual provides important safety information. All operators of this product
must review this safety information.
Section 3 describes the functions of the machine, rotary type tool changer and centralized
lubrication system, complete with a full technical specification.
Section 4 gives details on the shipping and handling of the machine.
Section 5 introduces the operator to the installation procedure.
Section 6 gives an overview of the operation modes available and general operational
procedures.
Section 7 gives details of adjustments which the operator may be required to make.
Section 8 gives details of the maintenance procedures to be done by the operator.
Section 9 lists the common faults for the rotary type tool changer and the centralized
lubrication system.
Section 10 gives details of the parts lists for the 560 Mini Mill, rotary tool changer and
centralized lubrication system.
Section 11 gives details of the parts lists for the 710 Vertical Maching Center, rotary tool
changer and centralized lubrication system.
Section 12 provides an overview of the wiring for the machine.
Section 13 contains the standard warranty for the machine.