Specifications

94
Issue 01 XYZ Machine Tools July 08
XYZ 560 Mini Mill and 710 VMC Operation Manual
7.7 Adjustment of Cam and Bearings
1. Loosen the screws of the left and right tuneup caps, see Figure 61.
2. Adjust the caps to move the cam up. The cam will make contact with the bearings.
3. Adjust the nut to move the cam left or right, see Figure 62.
4. Tighten the screws of the left and right tuneup caps.
Figure 61 Adjustment of cam and bearings
xyz-022
Power output
The wide side of
the tuneup cap
must be on the
power output side.
*
Wide side
Narrow side
tuneup cap