Specifications

July 08 XYZ Machine Tools Issue 01

XYZ 560 Mini Mill and 710 VMC Operation Manual

7.6 Adjust the Square Along the X, Y and Z Axes

1. Prepare the dial gauge set and square rule.

2. Position the square rule on the working table.

3. Fix the dial gauge set directly under the spindle, refer to Figure 60.

4. Move in X, Y and Z direction to level the machine until the readings at both ends are the

same.

5. Measure the square along the three axes.

6. If the values are over the standard value, adjust the Machine.

Figure 60 Adjusting the square along the X, Y, Z axes

xyz-051

SQUARE

RULE

DIAL GAUGE