Specifications

Issue 01 XYZ Machine Tools July 08

XYZ 560 Mini Mill and 710 VMC Operation Manual

7.2 Adjustment of Table Gib

The taper gib ‘A’ is used for precise adjustment of the moving table, refer to Figure 56. The

screw ‘B’ and ‘C’ is used to set the gib. To adjust the gib:

1. Turn the screw ‘C’ anti-clockwise to loosen the gib.

2. Turn the screw ‘B’ clockwise to adjust the gib until the table moves smoothly and

precisely.

3. After adjustment is completed, tighten the screw ‘C’ to set the gib.

Figure 56 Adjustment of table gib

7.3 Adjustment of Saddle Gib

The taper gib ‘A’ is used for precise adjustment of the moving saddle, refer to Figure 57. The

screw ‘B’ and ‘C’ is used to set the gib. To adjust the gib:

1. Turn the screw ‘C’ anti-clockwise to loosen the gib.

2. Turn the screw ‘B’ clockwise to adjust the gib until the table moves smoothly and

precisely.

3. After adjustment is completed, tighten the screw ‘C’ to set the gib.

Figure 57 Adjustment of saddle gib

xyz-065

xyz-138