User guide

INSTALLATION INSTRUCTIONS FOR CMP GLAND TYPE A2

DUBAI • HOUSTON • NEWCASTLE • SINGAPORE • SHANGHAI • PUSAN • PERTH

www.cmp-products.com

CABLE GLAND COMPONENTS

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE BEGINNING THE INSTALLATION

1. It is not necessary to dismantle the gland any further than illustrated below.

321

1. Entry Item

2. Seal

3. Seal Nut

2. Fit the gland into the equipment and fully tighten the entry item (1).

4. Slacken the seal nut (3) to relax the seal (2).

5. Pass the cable through the gland to the desired position, then tighten the seal nut by hand until

resistance is felt (when the seal contacts the cable). Tighten with a spanner one further turn.

3. Determine the conductor length required to suit the installation and prepare the cable

accordingly, removing part of the outer sheath where required to reveal the insulated conductors.