Specifications

United States January 10, 2003

Maintenance & Service Guide

Presario Series

Models : 1270, 1670, and 1675

Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications

Pin Assignments | Battery Pack Operations

For Models: 1670 and 1675

CAUTION: Only change settings 1-5 on SW1 . Settings 6-10 vary by model and should not be changed when replacing the

system board. Ensure the dip switch voltage settings (SW1

and SW3 ) on the system board are correct for the computer

model and processor voltage marked on the processor chip. If the system board dip switch voltage settings are not correct, damage

may occur to the computer and/or system board.

NOTE:

The black area on the dip switch indicates the position of the switch.

Return to Removal & Replacement Procedures

privacy statement

legal notices