Specifications

United States January 10, 2003

Maintenance & Service Guide

Presario Series

Models : 1270, 1670, and 1675

Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications

Pin Assignments | Battery Pack Operations

17. Remove three screws from

the system board.

IMPORTANT:

The

Ethernet

Connector Plug

must be

removed

before

removing the

system board.

After removing

the screws and

standoffs from

the system

board, remove

the

Ethernet

Connector Plug

(located on the

left side of the

base

enclosure) by

pushing it out

from the inside

of the chassis.

Next Step

privacy statement

legal notices