Specifications

United States January 10, 2003
Maintenance & Service Guide
Presario Series
Models : 1270, 1670, and 1675
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications
Pin Assignments | Battery Pack Operations
10. Remove the connector
on the end of the display flex
data cable.
IMPORTANT:
Compaq
recommends
replacing the
LVDS interface
connector on
the display flex
data cable
after
removing.
CAUTION: The
connector on the end
of the flex cable must
be removed before the
cable can be routed
through the slot on the
Upper CPU cover.
11. Gently pull the flex data
cable and backlight cable
attached to the display panel
assembly through the slot on
the Upper CPU cover and
remove the display panel
assembly with flex data and
backlight cable attached.
NOTE:
When removing the
display panel
assembly, observe the
display panel
assembly flex cable
routing and position.
To replace the display panel
assembly, reverse the previous
procedures.
Return to Removal &
Replacement Procedures
privacy statement
legal notices