Specifications

United States January 10, 2003

Maintenance & Service Guide

Presario Series

Models : 1270, 1670, and 1675

Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications

Pin Assignments | Battery Pack Operations

4. Turn the computer over

(right side up), pull forward on

the display latches to release

and open the display

assembly.

5. Lift up front end of the

palmrest cover with touch pad

and remove it from the groove

in the chassis.

6. Tilt the palmrest cover with

touch pad, allowing it to rest

on top of the keyboard, and

disconnect the flex cable from

the LIF connector on the

palmrest cover.

CAUTION: When

replacing the palmrest

cover with touch pad,

ensure that the cable is

fully inserted into the

LIF connector on the

system board. If the

metal end should come

in contact with the

keyboard, damage may

occur to the computer.

To replace the palmrest cover

with touch pad, reverse the

previous procedures.

NOTE:

When replacing the

palm rest cover

ensure the cable is

properly routed

through the slot on

the Upper CPU cover.

Return to Removal &

Replacement Procedures