User's Guide

2. Installing NovaFace
This chapter gives the information about the requirements and the prerequisites for installing
NovaFace and the installation procedures.
2.1. Installation Requirements
Before installation, make sure that the following requirements are met.
2.1.1. Environmental Requirements
The NovaFace is designed and intended for indoor use only. The device is not
weatherproof and must not be exposed to water, ice, extreme temperatures or
other adverse weather conditions. If it is required to use the device in outdoor
or extreme environments, contact local sales or [e-mail] for more
information.
☑
Avoid the location that is exposed to backlight, direct sunlight, and other strong
illumination.
☑
Choose the location with moderate ambient light.
Environmental requirements
☑
Determine the height at which you install the device.
The recommended mounting height is 135 cm (53 inches) from the floor to
the bottom of the device. It covers a person’s height from 140 cm (55 inches)
up to 190 cm (75 inches) at the distance of 55 cm (22 inches) from the
device.
www.cmi-tech.com
(c) 2020, all rights reserved
Page
9 of 28
NovaFace User Guide, 0.1
May 2020