Installation Guide

-4-
- Please remove the false fronts (two small or
one large panel) please be careful not to damage
the cabinet front.
- Apply painter's tape to the cabinet front, this will
help prevent damaging the surface when cutting
out the drawer fronts.
- If the cabinet hasacenter support (if you have two
smaller false fronts you will haveacenter support)
please remove it at this time. Cut along the bottom
even with the drawer opening making sure you
do not cut into the cabinet.
- Please remove the top rail, being careful not to
cut into the cabinet stiles.
1. Prepare the Cabinet-Replacement of an Existing Sink
2. Preparing Your Countertop
- Put the painter's tape at the centerline of the cabinet
from the backsplash to the front edge of the countertop.
- Put the painter's tape across the front edge of the
countertop along the entire width of the sink base
cabinet.
- Mark the centerline of the cabinet onto the painter's
tape.
If you haveaNew Countertop Installation please
refer to page 9.
Centerline
Haveaquestion? DON'T GO BACK TO THE STORE, WE CAN HELP, just call 1-800-626-3525, 8 a.m. to 5 p.m. EST Monday-Friday,
or send an email to [e-mail].
For Top-Mount Use Only
Retrofit Apron Front Farm Sink
With Dual Mount Capability
Installation Instructions