Installation Guide

- 10 -
4. Trace the Template
- Put the painter's tape at the centerline of the cabinet
from the backsplash to the front edge of the countertop.
- Put the painter's tape across the front edge of the
countertop along the entire width of the sink base
cabinet.
- Mark the centerline of the cabinet onto the painter's
tape.
3. Preparing Your Countertop
- Cut out the paper template along the Top Mount
marked line.
- Cut out the diamond on the template this will help you
line up the centerline, it should be in the center of the
diamond.
- Please put painter's tape to all exposed outside edges
prior to securing the template in place. This will prevent
chipping when cutting.
- Put the template on the countertop. Align the template
with the lines marked on the painter's tape.
- Mark the2notches from the template 1-15/16" from the
edge of the countertop.
- Tape the template in place.
- Trace the template on to the painter's tape.
- Trace the notches at the front of the template.
- Remove the template
- Put painter's tape to the front of the countertop to prevent
chipping the laminate when cutting.
- Extend
the marked lines down the front of the countertop
onto the painter's tape.
Center line
Countertop
Overhang
Front of Cabinet
Haveaquestion? DON'T GO BACK TO THE STORE, WE CAN HELP, just call 1-800-626-3525, 8 a.m. to 5 p.m. EST Monday-Friday,
or send an email to [e-mail].
For Top-Mount Use Only
Retrofit Apron Front Farm Sink
With Dual Mount Capability
Installation Instructions