Compass @ Manufacturer ATONAL Overspends fondants LIMITED LIFETIME WARRANTY Compass Manufacturing International warrants to the original consumer purchaser that the faucet be free from defects In material and workmanship for 2s long as the original consumer purchaser owns the home in which the faucet was first installed. In the event that Doreen faucets are used n a Commercial Application, this warranty s lifted for overload of 5 years, unless otherwise specifically stated In the catalog and/or price book.
Helpful Tools Tools: Gather the necessary tools as shown below to complete the installation of this faucet. Some may not be needed depending on the model of faucet you are installing.
1. Position the faucet in order on the counter top as shown. Don't forget the O-ring 2. 2. Assemble clamp ยง3 and lockout {3 to faucet shank by hand and tighten the screws {8 with the screwdriver.
Instruction for product with drain option only . Remove old drain assembly. Clean all sink surfaces to remove old putty and dirt before installing new drain. Disassemble new pop-up assembly: remove nut@3, outlet pipe 80, washer 29, lockout 88 , washer 23 and washer . If the faucet Is Installed In a sink with overflow, follow step 2. Otherwise, please skip to step 3. . Unscrew the cover 2 counterclockwise by hand. 22 Unscrew the stopper core @ counterclockwise with 2. proper tool.
